Used tubes represent reconditioned and surplus casing pipe systems recovered from completed deep foundation, drilling, and geotechnical projects. These are typically seamless or welded steel tubes that have undergone structural integrity assessment and surface treatment to meet redeployment standards for secondary applications in borehole construction, pile driving support, micropile installation, and ground improvement operations. Composed primarily of high-strength carbon or alloy steel (typically ASTM A252, EN 10219, or equivalent grades), used tubes offer cost-effective solutions for contractors managing project economics while maintaining adequate load-bearing and wear resistance characteristics essential for demanding subsurface conditions. In deep foundation applications, reconditioned tubes function as temporary or permanent casings for rotary boring, percussion drilling, and auger operations. They provide borehole wall stabilization in loose, unstable, or water-bearing strata, preventing cave-ins and slurry loss while enabling precise pile placement and ground treatment. Used tubes are particularly valuable in micropile construction, where they serve as structural casings for hollow-bar systems and post-tensioned installations. In diaphragm wall projects, reconditioned casing supports guide wall integrity during excavation. Ground improvement specialists employ used tubes as drilling casings for jet grouting, soil mixing, and dynamic compaction applications where temporary casing is required for equipment guidance and ground parameter control. Supply of used tubes typically occurs in lengths of 3.0 to 12.0 meters with external diameters ranging from 76 mm to 1,220 mm, depending on source project specifications and reclamation operations. Tubes are delivered as bundled stacks, with protective wrapping to minimize corrosion and mechanical damage during transport and site storage. On-site deployment requires proper handling equipment (cranes, hoisting rigs) and storage on level, well-drained ground with rust-preventive coatings maintained throughout the construction phase. Weight management and thread condition assessment are critical before installation to ensure compatibility with drilling or piling rig couplings and drive systems. Primary variants include flush-joint casing (seamless for high internal pressures and rotational stability), welded casing for standard rotary operations, and ring-grooved sections optimized for frictional engagement and reduced slippage. API and EN specifications classify tubes by grade (K55, N80, P110 equivalents) and collapse/burst ratings, ensuring selection matches anticipated hydrostatic loading and torque demands. Some reconditioned inventory includes corrosion-resistant coatings or internal epoxy linings for aggressive chemical environments. Selection criteria center on original yield strength, wall thickness, external corrosion depth (typically <10% reduction permitted), thread integrity (visual inspection and coupling test requirements), and dimensional fit with existing rig equipment. Engineers verify previous service history and non-destructive testing records (ultrasonic thickness measurement, magnetic particle inspection) to confirm safe reuse loads and drilling depths. Compliance with ASTM A252 (Steel Casing), EN 10208 (seamless casing pipes), and API 5A/5AX standards ensures structural reliability. ISO 9001 certification of reclamation vendors and material traceability documentation provide confidence in quality and regulatory acceptability across EU, North American, and international jurisdictions.
Used tubes represent reconditioned and surplus casing pipe systems recovered from completed deep foundation, drilling, and geotechnical projects. These are typically seamless or welded steel tubes that have undergone structural integrity assessment and surface treatment to meet redeployment standards for secondary applications in borehole construction, pile driving support, micropile installation, and ground improvement operations. Composed primarily of high-strength carbon or alloy steel (typically ASTM A252, EN 10219, or equivalent grades), used tubes offer cost-effective solutions for contractors managing project economics while maintaining adequate load-bearing and wear resistance characteristics essential for demanding subsurface conditions. In deep foundation applications, reconditioned tubes function as temporary or permanent casings for rotary boring, percussion drilling, and auger operations. They provide borehole wall stabilization in loose, unstable, or water-bearing strata, preventing cave-ins and slurry loss while enabling precise pile placement and ground treatment. Used tubes are particularly valuable in micropile construction, where they serve as structural casings for hollow-bar systems and post-tensioned installations. In diaphragm wall projects, reconditioned casing supports guide wall integrity during excavation. Ground improvement specialists employ used tubes as drilling casings for jet grouting, soil mixing, and dynamic compaction applications where temporary casing is required for equipment guidance and ground parameter control. Supply of used tubes typically occurs in lengths of 3.0 to 12.0 meters with external diameters ranging from 76 mm to 1,220 mm, depending on source project specifications and reclamation operations. Tubes are delivered as bundled stacks, with protective wrapping to minimize corrosion and mechanical damage during transport and site storage. On-site deployment requires proper handling equipment (cranes, hoisting rigs) and storage on level, well-drained ground with rust-preventive coatings maintained throughout the construction phase. Weight management and thread condition assessment are critical before installation to ensure compatibility with drilling or piling rig couplings and drive systems. Primary variants include flush-joint casing (seamless for high internal pressures and rotational stability), welded casing for standard rotary operations, and ring-grooved sections optimized for frictional engagement and reduced slippage. API and EN specifications classify tubes by grade (K55, N80, P110 equivalents) and collapse/burst ratings, ensuring selection matches anticipated hydrostatic loading and torque demands. Some reconditioned inventory includes corrosion-resistant coatings or internal epoxy linings for aggressive chemical environments. Selection criteria center on original yield strength, wall thickness, external corrosion depth (typically <10% reduction permitted), thread integrity (visual inspection and coupling test requirements), and dimensional fit with existing rig equipment. Engineers verify previous service history and non-destructive testing records (ultrasonic thickness measurement, magnetic particle inspection) to confirm safe reuse loads and drilling depths. Compliance with ASTM A252 (Steel Casing), EN 10208 (seamless casing pipes), and API 5A/5AX standards ensures structural reliability. ISO 9001 certification of reclamation vendors and material traceability documentation provide confidence in quality and regulatory acceptability across EU, North American, and international jurisdictions.
Get the latest equipment listings, industry news, and market insights.